background image

 
 

DESCRIPTION 

 

The instructions in this manual contain important information on the safe mounting, usage, cleaning and maintenance 
of  the  device.  Thus,  keep  the  manual  at  a  place  easily  accessible  by  the  person  who  will  use  the  machine,  and  the 
technician. 

 

Mounting,  conversions  for  different  gas  groups  or  electrical  inlet,  and  maintenance  works  of  the  device  should  be 
performed  by  a  specialist  authorized  in  this  subject  and  in  accordance  with  the  instructions  of  the  manufacturer 
company. 

 

Gas and electrical connections of the device should be arranged according to the tables and electrical diagram given in 
this manual. 

 

Manufacturer company accepts no responsibility for the final damages incurred in humans or properties that are caused 
by  any  procedure  not  conforming  to  the  instruction  manual,  or  maintenance  or  technical  interventions  that  are  not 
performed by authorized people. 

 
 

TYPES

 

 

G7M100G          – 70 series Pasta Cooker 

 

G9M100G     – 90 series Pasta Cooker 

 
 

MOUNTING INSTRUCTION 

Placement

 

 

Place the device beneath a filtered exhaust hood in order to eliminate smell and fume that may be emitted during 
cooking. 

 

Place the device at a place min. 10cm away from the side or back wall to prevent excessive temperature rises.   

 

Device should be placed on a flat surface by suitably balancing on the four adjustable legs. (Figure 1) 

 

Remove the protective nylon on the device. Clean the adhesive particles left on the device with a suitable cleaner. 

 

Never leave flammable material near the device. 

 
 

Gas Connection 

 

Device should be connected in accordance with the national and local gas standards of the relevant country. 

 

Gas inlets of the device are indicated with a (Figure 2) label on device body. 

 

Connection to the gas installation should be made with flex pipe and ball valve. Fix the said ball valve to a place that is 
away from heat and easily accessible in case of a danger. 

 

After gas inlet connection is completed, check for possible gas leakages. 

 

Feed  the  device  with  the  gas  and  pressure  as  specified  on  device  information  plate  and  adjusted.  If  the  gas  type  to 
which the device was adjusted for is not suitable to the gas type at the mounted place, follow the instructions written 
below. 

 

 

ATTENTION:

 

All adjustments and modifications to be performed on the 

gas installation and connection of the device should be performed by 
authorized people.

 

Gas pressure may never exceed 21mbar for Natural gas 

and 30mbar for LPG.

 

 
 

 

Содержание 70 Series







Отзывы: