Küschall Compact Скачать руководство пользователя страница 23

Страница: 23 / 44

KÜSCHALL

COMPACT

Service Manual

LEGRESTS

Legrests with angle measurements of 70, 80 and 90° are available.

Replacing the locking mechanism

Difficulty:

Tools:



Screw off unlocking lever

manually.



Remove hinge pin



Loosen bolts



Remove locking mechanism

and replace with a new one.



Reinsert bolts

and tighten.



Screw in the hinge pin

again.



Screw the unlocking lever

back on manually.

Setting the locking lever

Difficulty:

Tools:

It must be possible to move the unlocking lever

1-2 mm freely

forward and back, without having to move the bolt

. This guaran-

tees that the bolt is sitting optimally in the counterpiece

. If this free

mobility is greater or smaller than specified, the unlocking lever must
be reset:



Screw off the unlocking lever

manually.



Loosen the hinge pin

(do not remove).



Screw bolt

in deeper to reduce movement or screw bolt

further out to increase movement.



Set it so that the pin can move freely by 1-2 mm.



Retighten the hinge pin

again.



Screw the unlocking lever

back on manually.

3 Nm

Содержание Compact













































Результаты поиска

Содержание Compact

Отзывы:

Küschall Compact, Руководство по обслуживанию, Страница: 23 / 44

Результаты поиска

Содержание Compact

Отзывы: