Küschall Compact FF, Руководство по обслуживанию, Страница: 15 / 56

Instructions
Rear seat-to-floor height with respect to the rear wheels and positioning on the frame
Rear wheel size [inch]
Rear seat
height (RSTF)
[mm]
22’’ 24’’ 25’’ 26’’
RSTF 370 1
— — —
RSTF 380 2
— — —
RSTF 390 3 1
— —
RSTF 400/410
4 2 1
—
RSTF 420
5
3 2 1
RSTF 430 6 4 3 2
RSTF 440
7 5
4 3
RSTF 450/460
8 6 5 4
RSTF 470 9 7 6 5
RSTF 480 10 8 7 6
RSTF 390
—
9 8 7
RSTF 500
—
10 9 8
1
2
3
4
5
6
7
8
9
10
11
12
6.2.3 Seat Width (SW)
The possible seat width range is from 280 – 500 mm.
Once the Seat width is specified, it is very difficult to change it: The cross struts, backrest cover (on standard backs) and,
on some configurations, the footrests must be replaced.
6.2.4 Seat depth (SD)
The possible seat depth range is from 320 – 500 mm.
To reduce the seat depth, the cross struts must be shortened and a new appropriately sized seat cover fitted. At a seat
depth ≥ 400 mm, the frame can be shortened.
To enlarge the seat depth, new cross struts, a new appropriately sized seat cover and, depending on the seat depth, a new
frame must be installed.
6.2.5 Replacing the Seat Cover
Torx screwdriver (10)
■■□
1. Loosen bolts A and remove plug B .
2. Remove seat cover
C
including plastic rods.
3. Position new seat cover. Adjust seat cover to width
(seat width + 25 mm).
4. Retighten bolts and reinsert the plugs.
A = 4 Nm
6.2.6 Turning the Seat Locking Mechanism
If the seat edge can be too easily removed from the seat locking mechanisms, either the front two or all four seat
locking mechanisms can be rotated by 180°:
1659353-A 15