Küschall Advance, Руководство пользователя

Страница: 12 / 116

R33
3.3 Backrest
Backrest cover
You can adjust the tension of the backrest cover as required.
Adjusting the backrest cover
1. Remove the backrest cushion A .
2. Loosen the Velcro® tapes B on the rear of the backrest cover
by simply pulling on them.
3. Tighten or loosen the tapes as required then reattach them.
WARNING!
Risk of tipping
If the bands are set very loose, the tipping point of
your wheelchair is changed for the worse.
– Ensure that the bands are set correctly.
3.4 Push handles
IMPORTANT!
– Always check the push handles before using the
wheelchair, as to whether the hand grips are
secure, cannot be turned and cannot be pulled
off.
Foldable push handles (optional)
1. Fully depress button A and fold up respectively fold down the
push handle B until it audibly engages.
CAUTION!
If not correctly engaged, the push handle
could accidentally fold down while pushing the
wheelchair.
– Make sure that the push handle is correctly
engaged.
12 1583557-A