
Components and their functions
1.
To set the height of the push handles, loosen the bolt
$
, push the
handle to the desired position and tighten the bolt again.
3.6 Side rest, infinitely height adjustable (optional)
Removing
1.
Pull the side rest by the arm cushion out of the holder.
2.
To adjust how easy or difficult it is to pull the side rest out of the
holder, change the degree to which the screws
&
are tightened.
Fitting
1.
Push the side rest into the holder.
Adjusting the height
1.
Loosen the screw
$
of the retaining plate
%
.
2.
Move the armrest upwards or downwards until you reach the
desired height.
3.
Tighten the screw
$
.
4.
Perform the setting on both sides.
3.7 Antitipper
An antitipper prevents the wheelchair from tipping backwards.
WARNING!
Risk of overturning
Antitippers that are incorrectly set or no longer working
can lead to overturning.
ದ
Always check that the antitipper is working before
using the wheelchair and have it set or readjusted by
a specialist dealer when required.
1512598-B
11