4) Specifications
=
The meter has been designed according to
EMC directive: 2004/108/EC
=
Ultrasonic wave frequency : 5MHz
=
Digital display : 4 digits
=
Measurement range :1. 2mm ~ 220mm (steel).
=
Tubes measurement : Minimum
f
20mm*3mm.
=
Ultrasonic wave velocity : 1000~9999 M/s
=
Resolution : 0.1mm.
=
Accuracy : ± (1%H +0.1mm).
=
Measurement rate : 0.6 second.
=
Power supply : AAA, 1.5V*3
=
Operating temperature : -10~+50°C
=
Storage temperature : -40~+70°C,
-40~+158°F
=
Dimensions : 165(L) x 60(W) x 30(H)mm.
=
Weight : approx 210g (including battery and
probe).
=
Accessories : Probe, operating manual,
batteries.
4) Mounting battery and probe
Remove the battery cover on the back and put in
three 1.5V AAA batteries according to the mark on
the shell to insure putting batteries in correctly, and
then close the battery cover. Insert two plugs of the
probe into two sockets on the top of the meter.
5) The method of usage
=
Press button “On/Off”, the meter selects material
1 automatically, and displays the velocity of
ultrasonic wave in material 1.
01
02
1) Preface
Please read the following information carefully
before using the meter. The ultrasonic thickness
gauge has been designed to measure the material
thickness that calipers can’t measure, such as boiler,
pressure vessels, armor of tank, ship hulls, glass
wall, tubes and so on.
2) Safety information
According to European Union’s CE safety
norms
=
Ambient temperature : -10 ~ +50°C, +14 ~ 122°F
=
Storage and transport temperature : -4.0 ~ +70°C
Environment conditions :
Maintenance & save:
Do not clean the meter using alcohol and impregnant
if you do not use it for a long time, please take out
the batteries and place the instrument in a dry
surrounding.
3) Function & Features
=
Measuring thickness of various good ultrasonic
wave conductors as steel, aluminium, copper,
glass etc.
=
Ultrasonic wave velocity or thickness display
=
Manual material selection
=
Ultrasonic wave velocity adjustable
=
Thickness unit “mm” or “inch” optional
=
Ultrasonic wave velocity testing
=
Coupling state display
=
Shut down manually or automatically
=
Low battery voltage indication
=
Built-in calibration metal block (4.0mm)
=
Software calibrating to insure high reliablity
