®
04
All function and Ranges with
this feature.
Data hold
Dimension
228(L)X75(W)X36(H)mm
Weight
465gr.aprox.(batteryincluded)
2.9 Accessories
Instruction manual
Test leads
9V battery
Carrying Case
3. Operating And Recalibration:
1. Transformer jaws
Pick up the AC current flowing through the conductor.
2. Trigger
Press the level to open the transformer jaw. When the finger
press on the level is released the jaws will close again.
3. Display
372 digit (1999). decimal point, minus polarity, over-range
and LO BAT indicators.
4. Data Hold Switch
A push switch, (Push ON, Push OFF, do not pull to select
function). Push ON to hold the measured value and store the
value in memory_ Push OFF to release hold function.
A rotary switch is used to select measurement Function and
Range switch.
5. Rotary Switch
®
05
6. "+ " connector
High input terminal for voltage, resistance, continuity,
measurement. Accept banana plugs.
7. "COM " input connector
Low input terminal for voltage, resistance, continuity,
measurement. Accept banana plugs.
8. Back light Switch
A push switch, (Push ON, Push OFF, do not pull to select
function). A Push ON, the back light will be on. Another
Push OFF, the back light wilt be off.
