®
®
02
21
Periodically wipe the case with a damp cloth and mild detergent; do
not use abrasives or solvents. If the meter is not to be used for
periods of longer than 30 days, remove the batteries and store them
separately.
Cleaning and Storage :
Battery replacement :
The meter uses standard 1.5V AAA Size (IEC R03) battery X 2.
Loosen the 2 captive screws from the battery cover case. Lift the
battery cover case. Replace the batteries. Replace battery cover
case. Re-fasten the screws.
–
–
This Clamp-on meter is designed to apply around or remove from
uninsulated hazardous live conductors. But still, individual protective
equipment must be used if hazardous live parts in the installation
where measurement is to be carried out could be accessible.
CAUTION :
Disconnect the test leads from the test points before changing meter
functions.
II. INTERNATIONAL ELECTRICAL SYMBOLS :
III. CENELEC Directives :
The instruments conform to CENELEC Low-voltage directive 2006/
95/EC and Electromagnetic compatibility directive 2004/108/EC &
RoHS directive 2011/65/EU.
Caution ! Refer to the explanation in this Manual.
Caution ! Risk of electric shock.
Earth (Ground)
Double Insulation or Reinforced insulation
Fuse
AC--Alternating Current
DC--Direct Current
Three-phase Alternating Current
conductors is permitted.
Application around and removal from hazardous live
3
