®
®
Measurement Category I
I
is applicable to test and measuring
circuits connect e d directly to utilization points (socket outlets
and similar points) of the low-voltage MAINS installation. Examples
are measurements on MAINS CIRCUITS of hou s e h o ld
appliances,
portable tools and similar equipment.
BRIEF INFORMATION ON MEASUREMENT CATEGORIES
2) CENELEC DIRECTIVES
Measurement Category IV
is applicable to test and measuring
circuits connected at the source of the building-’s l o w
voltage
MAINS installation Examples a
r e measurements on devices
installed before the main fuse or circuit bre
a
k e r in the building
installation.
03
Measurement Category III
is applicable to test and measuring
circuits connected to the distribution part of the building’s lo-w
voltage MAINS installation. Examples are
measurements on
distribution boards (including secondar y
meters), circuit-breakers,
cables, bus - bars, junction box es, swi tches, socket - outlets,
stationary motors in the fixed installation, and equipment for
industrial use.
The instruments conform to CENELEC Low - Voltage Directive
2014/35/EU, Electromagnetic Compatibility Directive 2014/30/EU
and RoHS 2 Directive 2011/65/EU plus amendment Directive (EU)
2015/863.
04
SPECIAL FEATURES :
●Fork-clamp Current measurement
●12mm Slim-Probe open jaws for easy slide into tight wirings.
●Cx range 200.0mF to 2500mF for start & run motor capacitors.
●MAX/MIN Recording Mode
●5ms Crest (Peak-Hold) Mode.
●
Backlight Display
●
Non-Contact EF-Detection (NCV) with Hi/Lo Selectable
Sensitivities.
●
Probe-contact EF-Detection (Single-pole) for precise
indication of live.
●
Auto ranging for all ranges.
●
Relative Mode.
●
Data Hold.
●
BeepLit feature for Diode & continuity.
● Intelligent Auto-Power off.
