Kurzweil Andante CGP 220 Скачать руководство пользователя страница 2

 

 

IMPORTANT SAFETY & INSTALLATION INSTRUCTIONS  

INSTRUCTIONS PERTAINING TO THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS

RADIO AND TELEVISION INTERFERENCE  

 

SAVE THESE INSTRUCTIONS 

WARNING:  When using electric products, basic precautions should always 

be followed, including the following: 
1.  Read  all  of  the  Safety  and  Installation  Instructions  and  Explanation  of 

Graphic Symbols before using the product. 

2.  Do  not  use  this  product  near  water  -  for  example,  near  a  bathtub, 

washbowl, kitchen sink, in a wet basement, or near a swimming pool, or 

the like. 

3.  This  product  should  only  be  used  with  a  stand  or  cart  that  is 

recommended by the manufacturer. 

4.  This  product,  either  alone  or  in  combination  with  an  amplifier  and 

speakers  or  headphones,  may  be  capable  of  producing  sound  levels 

that  could  cause  permanent  hearing  loss.  Do  not  operate  for  a  long 

period of time at a high volume level or at a level that is uncomfortable. 

If  you  experience  any  hearing  loss  or  ringing  in  the  ears,  you  should 

consult an audiologist. 

5.  This product should be located so that its location or position does not 

interfere with its proper ventilation. 

6.  This  product  should  be  located  away  from  heat  sources  such  as 

radiators, heat registers, or other products that produce heat. 

7.  This  product  should  be  connected  to  a  power  supply  only  of  the  type 

described in the operating instructions or as marked on the product. 
 

8.  This  product  may  be  equipped  with  a  polarized  line  plug  (one  blade 

wider than the other). This is a safety feature. If you are unable to insert 

the plug into the outlet, contact an electrician to replace your obsolete 

outlet. Do not defeat the safety purpose of the plug. 

9.  The  power  supply  cord  of  the  product  should  be  unplugged  from  the 

outlet when left unused for a long period of time. When unplugging the 

power supply cord, do not pull on the cord, but grasp it by the plug. 

10. Care  should  be  taken  so  that  objects  do  not  fall  and  liquids  are  not 

spilled into the enclosure through openings. 

11. The product should be serviced by qualified service personnel when: 

A. The power supply cord or the plug has been damaged; 

B. Objects have fallen, or liquid has been spilled into the product; 

C. The product has been exposed to rain; 

D. The  product  does  not  appear  to  be  operating  normally  or  exhibits  a 

marked change in performance; 

E. The product has been dropped, or the enclosure damaged. 

12. Do not attempt to service the product beyond that described in the user 

maintenance  instructions.  All  other  servicing  should  be  referred  to 

qualified service personnel. 

13. WARNING: Do not place objects on the product s power supply cord, or 

place the product in a position where anyone could trip over, walk on, or 

roll anything over cords of any type. Do not allow the product to rest on 

or be installed over cords of any type. Improper installations of this type 

create the possibility of a fire hazard and/or personal injury. 

WARNING:  Changes  or  modifications  to  the  instrument  not  expressly 

approved by Kurzweil could void your authority to operate the instrument. 
IMPORTANT: When  connecting  this  product  to  accessories  and/or  other 

equipment use only high quality shielded cables. 
NOTE:  This instrument has been tested and found to comply with the limits 

for  a  Class  B  digital  device,  pursuant  to  Part  15  of  the  FCC  Rules.  These 

limits  are  designed  to  provide  reasonable  protection  against  harmful 

interference in a residential installation. This instrument generates, uses, and 

can  radiate  radio  frequency  energy  and,  if  not  installed  and  used  in 

accordance  with  the  instructions,  may  cause  harmful  interference  to  radio 

communications.  However,  there  is  no  guarantee  that  interference  will  not 

occur  in  a  particular  installation.  If  this  instrument  does  cause  harmful 

interference  to  radio  or  television  reception,  which  can  be  determined  by 

turning the instrument off and on, the user is encouraged to try to correct the 

interference by one or more of the following measures: 

  Reorient or relocate the receiving antenna.  

 Increase the separation between the instrument and the receiver. 

  Connect the instrument into an outlet on a circuit other than the one to 

which the receiver is connected. 

  If  necessary  consult  your  dealer  or  an  experienced  radio/television 

technician for additional suggestions. 

The  normal  function  of  this  product  may  be  disturbed  by  strong  electro 

magnetic  interference.  If  so,  simply  reset  the  product  to  resume  normal 

operation by following the instruction manual. In case the function could not 

resume, please use the product in another location. 
NOTICE: This apparatus does not exceed the Class B limits for radio noise 

emissions  from  digital  apparatus  set  out  in  the  Radio  Interference 

Regulations of the Canadian Department of Communications. 
AVIS:  Le present appareil numerique n emet pas de bruits radioelectriques 

depassant  les  limites  applicables  aux  appareils  numeriques  de  la  class  B 

prescrites  dans  le  Reglement  sur  le  brouillage radioelectrique  edicte  par  le 

ministere des Communications du Canada. 

The lightning flash with the arrowhead symbol, within an equilateral

triangle is intended to alert the user to the presence of uninsulated

"dangerous voltage" within the product's enclosure that may be of

sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended 

to alert the user to the presence of important operating and 

maintenance (servicing) instructions in the literature

accompanying the product.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

NO USER SERVICEABLE PARTS INSIDE.

DO NOT REMOVE THE COVER.

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

 

 

IMPORTANT SAFETY INSTRUCTIONS

 

1.  Read these instructions. 

2.  Keep these instructions. 

3.  Heed all warnings. 
4.  Follow all instructions. 

5.  Do not use this apparatus near water. 

6.  Clean only with dry cloth. 

7.  Do not block any of the ventilation openings. Install in accordance with the manufacturer s 

instructions. 

8.  Do  not  install  near  any  heat  sources  such  as  radiators,  heat  registers,  stoves,  or  other 

apparatus (including amplifiers) that produce heat. 

9.  Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug 

has two blades with one wider than the other. A grounding type plug has two blades and a 

third grounding prong. The wide blade or the third prong is provided for your safety. If the 

provided  plug  does  not  fit  into  your  outlet,  consult  an  electrician  for  replacement  of  the 

obsolete outlet. 

10. 

Protect the power cord from being walked on or pinched, particularly at plugs, convenience 

receptacles, and the point where they exit from the apparatus.

 

11. Only use attachments/accessories specified by the manufacturer. 

12. Use only with a cart, stand, tripod, bracket, or table specified by the 

manufacturer, or sold with the apparatus. When a cart is used, use 

caution when moving the cart/apparatus combination to avoid injury 

from tip-over. 

13. Unplug  this  apparatus  during  lightning  storms  or  when  unused  for 

long periods of time. 

14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus 

has been damaged in any way, such as power-supply cord or plug is damaged, liquid has 

been spilled or objects have fallen into the apparatus, the apparatus has been exposed to 

rain or moisture, does not operate normally, or has been dropped. 

15. Allow adequate ventilation for the power adapter. Do not hide it under a carpet or behind a 

curtain or place it in an enclosed space where heat buildup can occur. 

WARNING:  To reduce the risk of fire or electric shock, do not expose this apparatus to rain 

or moisture. 
Do  not  expose  this  equipment  to  dripping  or  splashing  and  ensure  that  no 

objects filled with liquids, such as vases, are placed on the equipment. 
To  completely  disconnect  this  equipment  from  the  AC  Mains,  disconnect  the 

power supply cord plug from the AC receptacle. 

©2014 Young Chang Co., Ltd. All rights reserved. Kurzweil® is a product line of Young Chang Co., Ltd. Kurz-

weil®, Young Chang® , V.A.S.T.®, Andante®, and CGP220™ are trademarks of Young Chang Co., Ltd. All 

other trademarks and copyrights are property of their respective companies. Product features and specifications 

are subject to change without notice.

Содержание Andante CGP 220


























Отзывы: