8
3BA00221 • 2014-09-18 • Rev. 5
ersa i-CON2 & i-CON 2V
4.
Operating modes
4.1
Work mode
When the station is switched on, an activation dialogue will
appear for approximately 2 seconds. The i-CON 2 station
identification ① and software version ② will be dis
-
played. Lastly, the station will automatically switch to work
mode.
4.2
Parameter mode
Press and hold the i-OP down for approximately 2 seconds
to activate the parameter mode for the soldering iron.
4.3
Configuration mode
Switch to configuration mode by pressing the i-OP for 5
seconds when the i-CON 2 is switched on.
By turning and pressing the i-OP, the station can either be configured or the factory setting
can be re-applied.
0
_
2 s
2
0
_
1
0
_
1
0
_
0
2 s
1
0
_
♪!
2
♪!
0
2s
0
0,5 s
3
0
_
2
0
_
Operating modes