© Kurth Electronic GmbH, All Rights Reserved
8
1.8. Alarm settings: 1.8.1 A/B Treshold
Activation
On / Off
and setting a
threshold value to display the voltage at the upper edge of the display.
2. Language:
Setting the menu language
3. Software Updates:
Checks if an update is available and allows its in-
stallation
(greyed off if there is no update available)
. See the detailed
firmware update instructions
KE-Manager-Firmware-Update.pdf
4. Management Port:
Choose between
Auto / Static
. When
Static
is selec-
ted, it is possible to define a fixed IP address.
5. Reset Management IF:
Reset and restart the Management Interface.
6. System information:
Information about the built-in module versions
(hardware and software) and licences.
7. Licence information:
Displays open source software used in the device
and the corresponding license terms.
8. Start VNC:
Launches virtual network computing (VNC) that displays the
screen contents of the xDSL tester on a local computer (installed using
KE-Manager).
9. Modem Debug:
Creates an additional modem log file,
On
or
Off
10.
Batteriy status: 10.1 Set battery capacity
and selection of
10.2 Capacity values
of 4000 mAh to 8000 mAh
General Operation Help
deactivated, activate with key
activated, all inputs in order
> Testing possible
activated, add inputs
> Testing possible
activated, correct inputs
> Testing impossible
Red bar: Input /
verification required!
