© Kurth Electronic GmbH, All Rights Reserved
13
Connection
The TP09D is equipped with highly flexible test cords with 6-ABN clips. The
red test cord is connected to the A-wire, the green one to the B-wire. If the
cores are correctly connected to the box or strip to be tested (no mix-ups),
the voltage polarity is displayed without sign in monitor and talk mode. In this
case, the negative pole is on the A-wire and the positive pole on the B-wire.
The black test cord is intended for connection to earth, but is, as not required,
without function with normal delivery status.
Replacing the test cords
To replace the test cords, open the battery compartment. The cover simulta-
neously holds the test cords in the housing. When it is removed, the test cord
can be pulled out. The connections are screwed and can be opened easily.
