Operating Manual
KE7200 / KE7100
23
KURTH ELECTRONIC FERNMELDETECHNIK
www.kurthelectronic.de [email protected]
Overview of technical data
KE7200 Ethernet Performance Tester / KE7100 LANcheck
Copper wiring test:
Test of the data line assignment with the pin and pair assignment.
Sixteen predefined connection versions; easily create your own
definitions as simple as single pair.
Clearly laid-out graphic display for quickly identifying errors.
Identification of split pairs (crosstalk) starting at 2 m with a graphic
display.
Measure the individual wire lengths with TDR and display in m or ft.
Power over Ethernet (PoE) test:
Activate PoE functions, measure voltage and determine power available
according to IEEE 802.3af
IP network test:
Connection by either DHCP or static IP
Set your own IP and MAC address
List active stations by name (if defined), IP and MAC address
Ping test of selected addresses, the ping range can be set from 32 to
1024 bytes
Display ping results for received/lost and times
Cable trace:
Link - blink function with NLP
Trace tone for tracing cables with capacitive probe
Choose from four frequencies:
1. SOLID: 1,000 Hz
2. ALT: 1000/800 Hz
3. SOLID: 2,600 Hz
4. ALT: 2600/1,900 Hz
Surge projection:
Up to 100 V
Housing:
Sturdy and impact resistant, weather resistant ABS housing
Power supply:
Four 1.5V alkaline batteries provide a life greater than 40 hours
