3
INTRODUCTION
Thank you for purchasing a Kurt Precision Force vise. The PF Series of
vises are top of the line workholding options for today’s rapidly growing
5-Axis market. Backed by a lifetime warranty against workmanship and
material defects, these vises will perform at the highest levels of precision
and reliability for years to come, when used and maintained properly.
Kurt Anglock maintains it’s time tested design, which gives you the part
pull down that you need when machining high end parts. Other features
Include:
INTRODUCTION
PF Vise Clamp Force
10 ft. lbs. 720 force lbs.
20 ft. lbs. 1,520 force lbs
30 ft. lbs. 2,250 force lbs
40 ft. lbs. 3,050 force lbs
45 ft. lbs. 3,375 force lbs
•
Gibbed jaws for maximum clamping
repeatability
•
Multiple interchangeable jaw options
‐ Carvable (PF420C)
‐ Dovetail (PF420D)
‐ Serrated (PF420S)
•
Easily adjustable center line
•
Fast and effortless lash removal system
•
Double ended screw for flexible vise
operation
OPERATING INSTRUCTIONS
For proper vise operation insert the handle onto the hex of the vise. This
handle, combined with the correct amount of torque will provide you with
all the clamping force you will need to machine your parts. DO NOT use
any other type of pressure to open or close your vise.
The uses of handle extensions, air impact wrenches, breaker bars, or
hammer strikes are not recommended and will void the warranty if used.
This will also cause damage to the central holding block and screw
threads. If you need more clamping force you may require a larger vise.
To properly clamp a part in your Kurt vise you should place the part in
the center of the jaws. Clamping only on one side can result in loss of
accuracy. If one-sided clamping is necessary you MUST use a dummy part
on the other side.
