Kurt D40 AngLock, Руководство по эксплуатации

Страница: 4 / 20

4 ENGLISH |
Set-up Instructions
Now that you have your new Kurt HD-Series Vise, it’s time to set-up
and begin using it. You will see that your new vise comes with a Kurt
swivel handle and instruction manual in the shipping carton. The
handle is specifically designed to provide maximum torque to your
vise. Your vise should be mounted to a clean, flat surface. The surface
and the vise must be free of any chips, dirt or debris of any kind. The
mounting surface can be honed if necessary. Clean the bottom of the
vise with solvent or other cleaner if needed.
To minimize vise bed deflection, clamp your Kurt vise to your machine
table, pallet, or sub-plate using the built-in clamping slots provided.
Additional clamping can be used, but may not be necessary. Please
be sure to exercise good judgment when securing your vise to the
mounting surface. Be sure your vise is secured and will not move when
applying the machine pressure.
Manual Vise Clamping Force
Torque Ft.-Lbs. D40
10 1653
20 2923
30 4103
40 5241
50 6513
60 7807
Set-Up Instructions