background image

Troubleshooting Tips

All Kurt Manufacturing Company industrial workholding products and parts with the 
exceptions noted below, are warranted against  defects in material and workmanship 
for the life of the product or part.  (The life of the product is defined as that point in 
time when such item no longer functions due to normal wear and tear.)   Failure to 
properly maintain and/or properly operate the product or part that has been worn 
out, abused heated ground or otherwise altered, used for a purpose other than that 
for which it was intended, or used in a manner in consistent with any instructions 
regarding its use.  The sole obligation of Kurt Manufacturing Company, Inc. (Kurt) 
and the   purchaser’s SOLE AND EXCLUSIVE REMEDY hereunder, shall be limited 
to the replacement or repair of any Kurt product or part (by an authorized Kurt 
technician) which are returned to Kurt Manufacturing Company’s place of business, 
transportation, shipping and postal charges prepaid, and there determined by Kurt 
Manufacturing Company to be covered by the warranty contained herein.

THE LIMITED WARRANTY DESCRIBED HEREIN IS MADE EXPRESSLY IN LIEU OF ANY 
OTHER EXPRESSED OR IMPLIED WARRANTIES, INCLDING ANY IMPLIED WARRANTY OF 
MERCHANTABLITY OR FITNESS FOR A PARTICULAR PURPOSE.  KURT MANUFACTURING 
COMPANY IS NOT RESPONSIBLE FOR THE IMPROPER USE OF ITS PRODUCTS.  
KURT SHALL NOT BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL SPECIAL OR 
CONSEQUENTIAL DAMAGES, INCLUDING BUT NOT LIMITED TO, LOSS OF USE, REVENUE 
OR PROFIT.

KURT ASSUMES NO LIABILITY FOR, AND MAKES NO WARRANTY REGARDING ANY 
PURCHASE ITEMS WHERE THE MANUFACTURER OF SUCH ITEM  EXTENDS A SEPARATE 
WARRANTY.

9445 East River Road NW

Minneapolis, MN 55433

Phone: 877-226-7823

Fax: 877-226-7828

kurtworkholding.com

Manual Revision: 11.01.2014

Содержание 3800V Series





















Отзывы: