background image

K U R T   M A N U F A C U T R I N G   -    

L I F E T I M E   I R O N C L A D

T M

  W A R R A N T Y  

All Kurt Manufacturing Company industrial workholding products 

and parts with the exceptions noted below, are warranted against  
defects in material and workmanship for the life of the product or 
part.  (The life of the product is defined as that point in time when 
such item no longer functions due to normal wear and tear.)   Failure 

to properly maintain and/or properly operate the product or part that 
has been worn out, abused heated ground or otherwise altered, used 
for a purpose other than that for which it was intended, or used in a 
manner in consistent with any instructions regarding its use.  The sole 

obligation of Kurt Manufacturing Company, Inc. (Kurt) and the   
purchaser’s SOLE AND EXCLUSIVE REMEDY hereunder, shall be 
limited to the replacement or repair of any Kurt product or part (by an 
authorized Kurt technician) which are returned to Kurt Manufacturing 

Company’s place of business, transportation, shipping and postal 
charges prepaid, and there determined by Kurt Manufacturing     
Company to be covered by the warranty contained herein. 

THE LIMITED WARRANTY DESCRIBED HEREIN IS 
MADE  EXPRESSLY  IN  LIEU  OF  ANY  OTHER                 

EXPRESSED OR IMPLIED WARRANTIES, INCLDING 
ANY IMPLIED WARRANTY OF MERCHANTABLITY OR      
FITNESS FOR A PARTICULAR PURPOSE.  KURT 

 

 

 

 

MANUFACTURING COMPANY IS NOT RESPONSIBLE 

FOR THE IMPROPER USE OF ITS PRODUCTS.  KURT 
SHALL NOT BE LIABLE FOR ANY DIRECT, INDIRECT, 
INCIDENTAL 

SPECIAL 

OR 

CONSEQUENTIAL           

DAMAGES, INCLUDING BUT NOT LIMITED TO, LOSS 

OF USE, REVENUE OR PROFIT. 

KURT ASSUMES NO LIABILITY FOR, AND MAKES NO 

WARRANTY REGARDING ANY PURCHASE ITEMS 

WHERE THE MANUFACTURER OF SUCH ITEM          

EXTENDS A SEPARATE WARRANTY. 

9445 East River Road NW 

Minneapolis, MN 55433 

Phone: 877-226-7823 

Fax: 877-226-7828 

E-mail: [email protected] 

Website: www.kurtworkholding.com 

Operating Instructions Manual 

 

KURT 

3600A-Series Vise 

“Air” Base Assembly 

3600A - Forward     3610A - Reverse 

3620A - Forward, Short 

3630A - Reverse, Short 

Содержание 3600A Series











Отзывы: