Küppersbusch WT1458.0W-CN, Руководство пользователя

Страница: 9 / 28

tions on the washing programme tables
(see «Washing Programmes»).
Turn the programme selector dial to the re-
quired programme. The programme selec-
tor determines the type of washing cycle
(e.g. water level, drum movement, number
of rinses) and the washing temperature ac-
cording to the type of laundry.
The pilot light of button
8 starts blinking.
The selector dial can be turned either clock-
wise or anticlockwise. Position
to Reset
programme/ Switching OFF of the machine.
At the end of the programme the selec-
tor dial must be turned to position
,
to switch the machine off.
If you turn the programme selector dial
to another programme when the ma-
chine is working, the yellow pilot light of
button
8 will blink 3 times and the mes-
sage Err is displayed on the display to
indicate a wrong selection. The ma-
chine will not perform the new selected
programme.
Reduce the spin speed by pressing
button 2
By selecting a programme, the appliance
proposes automatically the maximum spin
speed provided for that programme.
Press button
2 repeatedly to change the
spin speed, if you want your laundry to be
spun at a different speed. The relevant light
illuminates.
Select the available options by
pressing the buttons 5 and 6
Depending on the programme, different op-
tions can be combined. These must be se-
lected after choosing the desired pro-
gramme and before starting the pro-
gramme. When these buttons are pressed,
the corresponding pilot lights illuminate.
When they are pressed again, the pilot
lights go out. If an incorrect option is selec-
ted, the integrated
red pilot light of the but-
ton 8 flashes 3 times and the message Err
is displayed.
For the compatibility among the washing
programmes and the options see chapter
«Washing programmes» .
Select the Delay Start by pressing
button 10
Before you start the programme, if you wish
to delay the start, press the button
10 re-
peatedly, to select the desired delay. The
relevant pilot light goes on.
The selected delay time value (up to 20
hours) will appear on the display a few sec-
onds, then the duration of the programme
will appear again.
You must select this option after you have
set the programme and before you press
button
8 .
You can cancel or modify the delay time at
any moment, before you press button
8 .
Selecting the delayed start:
1. Select the programme and the required
options.
2. Select the delay start by pressing the
button 10 .
3. Press button 8 :
– the machine starts its hourly count-
down.
– The programme will start after the
selected delay has expired.
Cancelling the delayed start after having
pressed button
8 :
1. Set the washing machine to PAUSE by
pressing button 8 .
2. Press button 10 once until the symbol
0’ is displayed
3. Press button 8 again to start the pro-
gramme.
Important! The selected delay can be
changed only after selecting the washing
programme again.
The Delay Start
can not be selected with
DRAIN programme.
Start the programme by pressing
button 8
To start the selected programme, press the
button
8 , the green pilot light of the button
8 stops blinking.
To interrupt a programme which is running,
press the button
8 : the green pilot light
starts blinking.
To restart the programme from the point at
which it was interrupted, press the button
8
again . If you have chosen a delayed start,
the machine will begin the countdown. If an
incorrect option is selected, the
red pilot
9