Küppersbusch KD7580.0GE, Инструкция по сборке и эксплуатации

Страница: 16 / 21

32
OPERATION
This cooker hood is regulated with touch-sensitive sensor controls located on the
front of the hood. The controls react when the corresponding symbol is touched
lightly.
You can regulate the power settings, the lamp, including the brightness level, as well
as the automatic delayed stop function with the sensor controls. A digital display
informs you about the setting that has been selected, the automatic delayed stop and
filter saturation.
Switching the cooker hood on / off
Touching this symbol will switch the cook hood on or off. When the hood is
switch on the fan will operate at power setting
“
2
”
.
Power controls
When the cooker hood is switched on, the power is controlled by pressing the
symbols
“
+
”
(to increase the power) and
“
-
”
(to reduce the power). Pressing
the symbol several times will increase or reduce the power setting from 1
–
4.
Automatic delayed stop
This cooker hood is equipped with an automatic delayed stop function which
automatically switches the hood motor off after 15 minutes. The automatic
delayed stop function should always be activated as soon as cooking has
been completed in order to remove the steam and odours that remain after
cooking. Touching the timer symbol lightly will switch on the automatic delayed
stop function. The power setting in the display will start flashing. The automatic
delayed stop function is switched off by touching the timer symbol or switching
off the cooker hood.
Switching the lamp on/off
The lamp is switched on and off by touching this symbol (LED module on / off).
Dimmer function
The display will how a horizontal bar for approx. 5 seconds without a break as
soon as this symbol is touched. When the symbol is touched again the display
will show the level of brightness. The lamp is pre-set at brightness level
“
9
”
in
the factory. Touching the
“
+
”
and
“
-
”
keys will set the brightness level of your
choice. Press the
“
lamp
”
symbol once again to save this setting.