background image

Operation

Switching on

Insert the plug into the wall socket.
Turn the Temperature regulator clockwise to
a medium setting.

Switching off

To turn off the appliance, turn the Tempera-
ture regulator to the "O" position.

Temperature regulation

The temperature is automatically regulated.
To operate the appliance, proceed as fol-
lows:
• turn the Temperature regulator toward

lower settings to obtain the minimum cold-
ness.

• turn the Temperature regulator toward

higher settings to obtain the maximum
coldness.

A medium setting is generally the most
suitable.

However, the exact setting should be chosen
keeping in mind that the temperature inside
the appliance depends on:
• room temperature
• how often the door is opened
• the quantity of food stored
• the location of the appliance.

Important!

 If the ambient temperature is

high or the appliance is fully loaded, and the
appliance is set to the lowest temperatures,
it may run continuously causing frost to form
on the rear wall. In this case the dial must be
set to a higher temperature to allow
automatic defrosting and therefore reduced
energy consumption.

First use

Cleaning the interior

Before using the appliance for the first time,
wash the interior and all internal accessories
with lukewarm water and some neutral soap
so as to remove the typical smell of a brand-
new product, then dry thoroughly.

Important!

 Do not use detergents or abra-

sive powders, as these will damage the fin-
ish.

Daily use

Movable shelves

The walls of the refrigerator are equipped
with a series of runners so that the shelves
can be positioned as desired.
For better use of space, the front half-shelves
can lie over the rear ones.

Positioning the door shelves

The model is equipped with a variable stor-
age box which is fitted under a door shelf
compartment and can be slide sideways.

 

 11

Содержание IKU169-0














Отзывы: