Küppersbusch IKE3270-2-2T, Руководство пользователя

Страница: 11 / 20

Problem Possible cause Solution
The temperature in the
appliance is too low. The temperature regulator is not
set correctly. Set a higher temperature.
The temperature in the
appliance is too high. The temperature regulator is not
set correctly. Set a lower temperature.
Many products are stored at the
same time. Store less products at the same
time.
The temperature in the
refrigerator is too high. There is no cold air circulation in
the appliance. Make sure that there is cold air
circulation in the appliance.
The temperature in the
freezer is too high. Products are too near to each
other. Store products so that there is
cold air circulation.
Upper or lower square is
shown in the tempera-
ture display. An error has occurred in meas-
uring the temperature Call your service representative
(the cooling system will continue
to keep food products cold, but
temperature adjustment will not
be possible).
dEMo appears on the
Display. The appliance is in demonstra-
tion mode (dEMo) Keep pressed approximately 10
sec. the OK button since a long
sound of buzzer is heard and the
Display shut off for a short while:
appliance start works regularly.
TECHNICAL DATA
Dimension of the recess
Height 1780 mm
Width 560 mm
Depth 550 mm
Rising Time 21 h
Voltage 230-240 V
Frequency 50 Hz
The technical information are situated in the
rating plate on the internal left side of the
appliance and in the energy label.
INSTALLATION
Read the "Safety Information" carefully
for your safety and correct operation of
the appliance before installing the
appliance.
Positioning
Install this appliance at a location where the
ambient temperature corresponds to the
climate class indicated on the rating plate of
the appliance:
Climate
class
Ambient temperature
SN +10°C to + 32°C
N +16°C to + 32°C
ST +16°C to + 38°C
T +16°C to + 43°C
29