Küppersbusch GS 881, Руководство по эксплуатации

Страница: 7 / 15

21
Before You Start
• Damage of the capillary tube caused by the user waives all the guarantee rights.
Connection to the power sup ply system
• We advise setting the temperature con trol dial to „0” before the connection (Phot. 3(2)).
• The appliance should be connected to a system of alternating current, 230 V /
50 Hz, through a properly in stal led socket.
Operation
Temperature control
•
The main switch 2
turns on the freezer.
•
Temperature dial 1
allows for efficient use of the frrezer depending on the quantity
of the stored products and the ambient conditions. By setting the control dial to „1” you
select the highest temperature, by setting the dial to „7” - the lowest.
•
Green indicator light 3
lights up when the appliance is plugged. Any operations on
the wiring system can result in an electric shock. The light goes out when the appliance
is unplugged, the control dial is set to „0” or the powers is down.
•
Red indicator light 6
indicates increased temperature in the freezing chamber.
The indicator lights up when:
- the appliance is plugged for the first time,
- the appliance is overfilled with fresh products, exceeding the parameters on the rating plate,
- freezer door was open for a prolonged time,
- the temperature in the freezer chamber is not appropriate,
- the dial is set to a higher number (lower temperature).
•
Super-freezer switch 4
with yellow indicator light 5.
The yellow indicator light 5
lights up when the switch 4 is turned on.
The freezer operates continuously.
Turn the „super-freeze” switch 4 on when:
- you want to cool down the freezer prior to storing products,
- you want to freeze a higher quantity of products.
Freezing food
• Practically, all the food products except vegetables consumed raw, such as lettuce,
can be frozen.
• Products should be packaged in material that is odorless, resistant to air and moisture
penetration, and not susceptible to fat and lye.
• Plastic bags, polyethylene and aluminum sheets are the best wrapping material types.
Make sure you mark the packages for easier identification of the content and take
down the date of the freezing.
•
The packaging should be tight and stick to the frozen product.
Do not use glass
packaging.
•
Fresh and warm (room temperature) products placed for freezing should not touch
the already frozen products.
All the controls are located in the control panel under the cover top of the freezer
(Phot.3). The freezer is equipped with the following controls