11
Left hand door opening
Fig. 4
Remove the
upper right
screw and pivot.
Straighten the
safety washer (4)
of the lower right
hinge. Remove
the screw (5) and
the pivot (6)
(Fig. 3). For
safety reasons bend the washer located under the
left hinge (Fig. 4), by using a tool (for ex. a
screwdriver). Remove the right door stop hinge
(3-Fig. 3).
Building-in
Recess dimensions
Height
880 mm
Depth
550 mm
Width
560 mm
The appliance’s door has been locked in position for
transport by means of pins on both sides.
According to the door opening direction, remove relevant
pins at the top and at the bottom.
Fig. 5
For safety
reasons,
minimum
ventilation must
be as shown in
Fig. 5.
Attention: keep
ventilation
openings clear of
obstruction
.
6
5
D563
4
50 mm
min.
cm
2
200
200 cm
2
min.
D526
Fig. 6
Air is taken in
through the
ventilation grille
at the bottom of
the appliance, but
an air outlet
“gap”, measuring
50 mm deep by
540 mm wide
(Fig. 6), must be
provided in the rear of the kitchen unit. This outlet
gap must also be kept clear between the top of the
unit and the ceiling.
Fig. 7
Slide the
refrigerator into
the unit recess
and fit the screws
into the top
bracket (Fig. 7)
and into the
bottom hinge
(Fig. 7).
D240
P
H
L
50
540
D585