Appliance description
GB
23
Operating the hob with the sensor keys
The ceramic glass hob is operated with touch control sensor
keys. The sensor keys are operated as follows: lightly touch a
symbol on the surface of the ceramic glass plate. A buzzer will
indicate when the controls have been operated correctly.
The touch control sensor key will be indicated as “key”.
ON/OFF key
(7)
This key is used to switch the entire hob on and off. It is, as it
were, the main switch.
Power setting display
(10)
The power setting display shows the power setting which has
been selected, or:
H................ Residual heat
.............. Pan recognition
A................ Automatic boost function
STOP ........ Stop function
.............. Keep-warm function
............. Bridging function (operating cooking zones
simultaneously)
Symbols
.......... Child safety device / lock
.......... Melting
.......... Timer function
.......... Power boost
Lock key
(11)
The lock key can be used to lock all of the keys.
Melting function key
(12)
For melting ingredients such as butter
Power key
(13)
Symbol
The power boost setting makes additional power available for
induction cooking zones.
STOP key
(14)
Symbol
The STOP function can be used to briefly stop the cooking proc-
ess.
Timer key
(15)
For programming the automatic switch-off device (timer) and the
minute minder.
Worth knowing about the slider
(sensor field)
In principle, the slider functions the same as the touch controls;
the only difference is that you can put your finger on the glass
ceramic surface and then move it around. The sensor field rec-
ognises this movement and raises or lowers the display setting
(power level) in accordance with the movement.
The term “sensor field” is used to mean slider from now on.
What must be observed when operating sensor fields?
Your finger should not be placed flat onto the glass ceramic sur-
face in order to avoid adjacent keys/sensor fields from reacting
by mistake.
Press the sensor field lightly or move your finger around
You can press the sensor field very lightly with your finger; when
this is done the setting on the display (power level) will gradually
change.
When you put your finger on the sensor field and then move it to
the left or right, the display setting will change progressively.
The faster the movement, the faster the change in the display.
Attention:
Pressing a sensor key and keeping it pressed (for approx.
3 seconds) may activate the automatic boost function “A”.
See the section on “Automatic boost function”.
sensor field
sensor
sensor
vitroceramic
finger
finger
sensor
sensor
vitroceramic
unsuitable
right
touch
move
