30
Operation
GB
Bridging function
The front and the rear cooking zones may be activated together for a cooking
process (bridging function). This enables larger cookware to be used.
1. Switch on the hob.
2. Press the
sensor field
of the rear and front cooking zones
simultaneously to activate the bridging function.
The bridging function is activated, the symbol
appears.
Operation is carried out with the
sensor field
of the front
cooking zone.
3. To deactivate the two
sensor fields
press them
simultaneously again or switch off the hob.
All four cooking zones of the type 60 model can be simultaneously activated.
To do so, touch the two
sensor fields
of the front cooking
zones
simultaneously. The bridging function is activated, the symbol
appears. Operation is carried out with the
sensor field
of the
front right cooking zone
.
To deactivate the two
sensor fields
press them simultaneously
again or switch off the hob.
Notes
• The roaster or the pot will need to cover at least half of the cooking zones
used in order to be recognised by the pan recognition device!
Power boost setting
(cooking zones marked with a P)
The power boost setting makes additional power available for induction cook-
ing zones. A large quantity of water can be brought to the boil very quickly.
1. Switch on the hob.
2. Press the
power key
once. The symbol
will blink for approx.
5 seconds.
3. Then press the respective
sensor field
to allocate it to a spe-
cific cooking zone.
The symbol
is shown and the power boost setting has been switched
on.
4. After 10 minutes the power boost setting will switch off automatically. The
symbol
will go off and power setting 9 will be reset.
Please note:
Press the respective
sensor field
to prematurely switch off the
power boost setting.
Power management
For technical reasons two cooking zones always comprise a module and
have a maximum power level.
If this power range is exceeded when a higher power setting level or the
power boost function is switched on the power management system will
reduce the power setting of the corresponding cooking zone of the module.
The display for this cooking zone will initially blink, after which the highest-
possible power setting will be consistently displayed.
Only model type 60
blinking
lit
Modules (power management)
