EEB 6100.0
23
Enamel
Oven interior, front, baking trays, drip pan, enamel hobs
Some plastic sponges with abrasive side can be used. Some products do
however contain grains in the abrasive side of the sponge which can cause
scratches.
Carefully try out the sponge on a small surface!
F
A cleaning scraper for glass ceramic surfaces is suitable for removing
heavy dirt.
F
To thoroughly clean your appliance we recommend the use of VSR O-
FIX-C. Oven spray may be used.
Stainless steel
Stainless steel door front, control panel, telescopic glide-out shelves
(acc. No. 601), backmobil (acc. No. 600)
[
Stainless steel is very sensitive to scratches!
Do not use a cleaning scraper!
[
Remove any deposits of calcium or any spots of grease, and starch as
soon as possible, or stains will appear!
For the cleaning a cleaning agent for stainless steel can be used.
We recommend to clean once a week stainless steel surfaces with an usual
cleaning agent for stainless steel. This will create a protective film protecting
the stainless steel surface from discolouring.
Glass
Inside of the door – coated glass
[
If possible, oven spray should not be used as it can cause the destruction
of the coated glass surface when used frequently.
A cleaning scraper for glass ceramic surfaces is suitable for removing heavy dirt.
F
To thoroughly clean your appliance we recommend the use of VSR O-
FIX-C or glass detergent.
Door front, control panel
F
Clean the
oven front
with warm water containing a small amount of
detergent, with a damp cloth o a soft sponge. You may use glass cleaning
agents.
Door sealing
F
The door sealing should be removed when cleaning the oven to avoid
that dirt can collect under the sealing. See page 24 “Replacing the door
sealing".
If necessary the sealing can be cleaned with detergent or washing-up liquid.
Buttons
Clean the buttons with warm water containing a small amount of detergent,
with a damp cloth o a soft sponge.
Removing and installing the oven door
Removing the oven door
– Open the oven door as wide as it will
go.
– Fold forward the clamps on the door
hinges.
– Take hold of the oven door on the
both sides and close it almost
completely.
– Gently lift the door and pull the
hinges forward away from the door
opening.
Reassembling the oven door
– Take hold of the oven door on both
sides and push the hinges into the
relevant holes on the oven. The hinge
will click into place.
– Slowly open the oven door full.
– Fold back the clamps on the door
hinges.
– Close the oven door.
Removing and installing the side racks
Removing the side racks
.
– Loosen the screws.
– Remove the slot-in racks.
Installing side racks
– Insert side racks and tighten down in
front.
