32
EEB 6500.0
Installation instructions for fitter
■
Only KÜPPERSBUSCH built-in hobs were designed and tested for use above
a Küpperbusch fitted oven. No other hobs may be used.
■
Statutory regulations and the connection specifications issued by the local
power apply company must be strictly observed.
■
Switch off the appliance by means of these safety devices before connecting
up the oven, carrying out repair work or replacing the oven light bulb.
Disconnect the appliance from the mains, disconnect fuse.
■
It must not be possible to touch components which are insulated under
operating conditions.
■
The earth wire must be so long that if the mains lead cleat fails, the live
wires of the connecting cable are subjected to tension before the earth wire.
■
The unit is ready to plug in and may be connected only to a properly
installed protected socket. Installing and wiring a socket or replacing the
connection cable should only be performed by an electrician and in
observance of the relevant regulations.
■
If the socket is inaccessible after the installation, safety regulations require
that an all-polo isolator with a contact opening of at least 3 mm be used
on the installation side.
■
The socket for plugging in the unit must be outside the installation space.
■
Built-in kitchen fixtures must be temperature resistant to 100 °C. This
applies especially to veneers, plastic coatings, adhesives and varnishes.
Adjacent cabinetry front must be temperature resistant to at least 70 °C.
■
The unit must be installed absolutely horizontal on a level, solid base. The
base must not be allowed to sag.
■
If the cupboard element is not attached to the way, screw on using an
ordinary bracket.
Electrics
[
WARNING! This appliance must be earthed!
Built-in cooker
Permanent connection by means of a cooker socket.
Hob
Connected via the cooker connection strip.
Circuit diagram
for the various mains ratings is illustrated on the
back wall of the appliance.
Total rating
at 230 V: max. 7.0 kW, of which
one oven: 3.5 kW,
at 235 V: max. 7.3 kW, of which
one oven: 3.6 kW
Electrical connection
Permanent connection: 400 V 3 N
~
50 Hz
Connection 3 N
~
Fuse current 16 A
Connection 2 N
~
Fuse current 16 A
Connection 1 N
~
Fuse current 32 A
Connection 3 x 230 V Fuse current 25 A
Connection cable
Use H 05 RR-F or H 07 RN-F.
Cable length
At least 2 m
Installation dimensions
Installation in a fitted kitchen
Installing the appliance
– Push the oven right into the cupboard alcove. Do not jam the cooker
connection!
Fastening the appliance
– Open the oven door and fix the
screws supplied at an angle through
the cupboard.
1022
1033
1025
