30
EEB 6500.0
Buttons
Clean the buttons with warm water containing a small amount of detergent,
with a damp cloth o a soft sponge.
Removing and installing the oven door
Removing the oven door
– Open the oven door as wide as it will
go.
– Fold forward the clamps on the door
hinges.
– Take hold of the oven door on the
both sides and close it almost
completely.
– Gently lift the door and pull the
hinges forward away from the door
opening.
Reassembling the oven door
– Take hold of the oven door on both
sides and push the hinges into the
relevant holes on the oven. The hinge
will click into place.
– Slowly open the oven door full.
– Fold back the clamps on the door
hinges.
– Close the oven door.
Removing and installing the side racks
Removing the side racks
.
– Loosen the screws.
– Remove the slot-in racks.
Installing side racks
– Insert side racks and tighten down in
front.
Folding heating element down/up
Folding heating element (top
heat/grill) down
– Open lock and fold heating element
down.
Folding heating element up
– Fold heating element up
and close
again with the lock.
Regenerating the ökotherm
®
catalyst
– Set the mode selector to Hot air convection
$
.
– Set the temperature control to ”
*
” and
– Heat the empty oven for 60 minutes.
