–
Finally, reinstall the lamp cover.
Fastening the support rails
Fastening the bracket
Walls 19 mm thick:
Walls 16 mm thick:
Adjusting
the height
Drilling template
Left catch lock
Right catch lock
Installation with adjustment of height and
depth
–
Remove the internal partition from the cupboard.
–
Fasten each of the two support rails with two screws 3.5 x 16.
–
Push the bracket into the side
slits of the hood.
–
Following the illustration below fasten the bracket to the cooker hood
using the hexagon head screws 6 x 10 and the washers.
–
Lift the cooker hood into the cup-
board and hang the bracket onto
the carriers of the support rails.
–
Adjust the height with the adjusting screws and push the cooker hood
into the correct position. If a wooden cover strip is to be mounted, do
this before aligning the cooker hood with the fold-down beam.
–
Now secure the cooker hood on
both sides (right and left) using
four 3 x 16 screws in each case.
–
Mount the cupboard into the
row of wall cupboards and align
with the adjoining cupboards.
–
Connect the extraction/recirculating mechanism.
–
Reinsert the internal partition.
spacing strip
covering cap
lamp cover
14
