21
english
WARNING! Any type of repair must only
be done by a specialised technician. Any
repair done by a person not authorised by
the manufacturer is dangerous.
Before contacting Technical Assistance,
check on the following:
The
Check whether:
- The appliance has been switched on.
- The appropriate temperature has been
selected.
- The air circulation orifices are covered by
the crockery.
- The crockery was left to heat up for
sufficient time.
Heating time depends on several factors,
such as, for example:
- Crockery material type and thickness.
- Quantity of crockery.
- How the crockery is arranged.
The crockery
Check
whether:
- You can hear the noise of a fan.
If the fan is operating then the heating
element is broken; if the fan is not
operating then the fan is broken.
- The switchboard fuses / circuit breakers
have fused / tripped out.
The crockery is heating up too much.
- The temperature selector is broken.
The on/off switch does not light up.
-
light has blown.
Disposal of the packaging
The packaging bears the Green Point mark.
Dispose of all the packaging materials such
as cardboard, expanded polystyrene and
plastic wrapping in the appropriate bins. In
this way you can be sure that the packaging
materials will be re-used.
Disposal of equipment no longer used
According to European Directive 2012/19/EU
on the management of waste electrical and
electronic
equipment
(WEEE),
home
electrical appliances should not be put into
the normal systems for disposal of solid
urban waste.
Outdated appliances should be collected
separately to optimise component material
recovery and re-cycling rates and to prevent
potential harm to human health and the
environment. The symbol of a rubbish
container superimposed by a diagonal cross
should be put on all such products to remind
people of their obligation to have such items
collected separately.
Consumers should contact their local
authorities or point of sale and request
information on the appropriate places to
leave their old home electrical appliances.
Before disposing of your appliance, render it
non-usable by pulling out the power cable,
cutting this and disposing of it.
BEFORE INSTALLATION
Check that the input voltage
indicated on
the characteristics plate is the same as the
voltage of the power outlet you are going to
use.
