2/22
T1-88-05
Internal use only
Configuration: DIAL CONTROL
Procedure
Disconnect the hob from the power supply and connect it again or switch off the safety fuses in the buil-
ding wiring system and switch them on again.
After doing so, DO NOT switch the hob on again with the on/off key!
Begin configuring within 2 minutes.
Accessing the configuration menu
1. Press key B and hold it.
2. Press key A, let go for 2 seconds and wait until a buz-
zer sounds.
Double buzzer: Error has occurred (start at 1. again)
3. Let go of key B.
4. Press key A. "E" will appear in all the cooking zone
displays while you are pressing.
5. The "E" in the cooking zone displays will flash; the
display will then switch to C.
The cooking zones can now be newly configured.
Configuration
1. Use a magnetic-based pan with a diameter of at least 16 cm..
2. Select your cooking zone and put the pan on the relevant zone.
3. Press the (C) display.
Under no circumstances may two pans be placed on the cooking zones simultaneously since in this
case they will both be allocated to one cooking zone. If this nevertheless occurs, you will need to
delete the entire configuration and start from the beginning again.
4. The display switches from (C) to (-). The cooking zone has been configured.
Repeat the procedure for all the cooking zones until the configuration menu is automatically exited once
the final cooking zone has been configured.
