Kuppersbusch KE9340.0, Инструкция по использованию и установке

Страница: 23 / 36

Appliance description
23
GB
3.1 Operating the hob with the sensor keys
The glass ceramic hob is operated with touch control sen-
sor keys. The sensor keys are operated as follows: lightly
touch a symbol on the surface of the ceramic glass plate. A
buzzer will indicate when the controls have been operated
correctly. The touch control sensor key will then be indica-
ted as “key”.
ON/OFF key (8)
This key is used to switch the entire hob on and off . It is,
as it were, the main switch.
Power setting display (12)
The power setting indicator shows the power setting which
has been selected, or:
.......... Residual heat
Sensor fi eld (11)
for setting the power levels.
Cooking zone selection key (9)
Press the respective cooking zone selection key to select
a cooking zone. Now the cooking level can be set.
Circuit activation key (13)
To activate other heating circuits.
Activation is only possible when the control lamp blinks.
Lock key (14)
The lock key can be used to lock all of the keys.
Minus key / Plus key of the timer (15)
For programming the automatic switch-off function and the
minute minder.
3.2 Worth knowing about the slider (sensor fi eld)
In principle, the slider functions the same as the touch
controls; the only diff erence is that you can put your fi nger
on the glass ceramic surface and then move it around.
The sensor fi eld recognises this movement and raises or
lowers the display setting (cooking level) in accordance
with the movement.
The term sensor fi eld is used to mean slider from now on.
What must be observed when operating sensor fi elds?
Your fi nger should not be placed fl at onto the glass cera-
mic surface in order to avoid adjacent keys/sensor fi elds
from reacting by mistake.
Press the sensor fi eld lightly or move your fi nger
around
You can press the sensor fi eld very lightly with your fi nger;
when this is done the setting on the display (power level)
will gradually change.
When you put your fi nger on the sensor fi eld and then
move it to the left or right, the display setting will change
progressively.
The faster the movement, the faster the change in the
display.
Sensor fi eld
unsuitable
right
tapping moving