Installation instructions KC 906.2 USA
5
Installing the cooking center
– Using 4.2 x16 mm screws, install the supporting rails in horizontal position
on the right side. Install the supporting rails on the left onto the sides of
the cabinets, using the following measurements.
– Connect the conduit to the conduit box.
– Fit the appliance in.
– Fasten the appliance onto the supporting rails using 4.2 x 7 mm screws.
– Use silicon to seal the appliance on the back and on the two sides.
Installing accessories
Installing the acc. no. 451 and 452
Dimensions of the drawers:
Model acc.
no. 451:
Model acc.
no 452:
For both models:
Measurements for the screws of the supporting rails for the drawers
– Screw on the supporting rails:
For model 451 A
≥
129 mm (
≥
5-1/16")
for model 452 A
≥
90 mm (
≥
3-9/16")
1.
2.
