background image

¥ The temperature inside the appliance is

automatically adjusted.
¥

Setting ã1Ò

= hightest temperature, warmest 

setting

¥

Setting ã6Ò

= lowest temperature, coldest 

setting.

¥

Setting ã

¥

Ò

= Off

A medium setting is generally the most suitable.

13

¥ Gradually pull the shelf in the direction of the

arrows until it comes free, then reposition as
required.

¥ For more thorough cleaning, the top and bottom

door sheves can be removed by pulling them in the
direction of the arrows, then refitting them in
position.

Internal Parts

Storage shelves

¥ The shelves can be removed for cleaning.

¥ To permit storage of food packages of various

sizes, the shelves can be placed at different
heights.

¥ To remove the internal shelf pull forward until it can

be tipped up or down and removed.

¥ Please do the same in reverse to insert the shelf at

a different height.

¥ For better use of space, the front half-shelves can

lie over the rear ones.

The glass shelf above the vegetable drawers
and the bottle shelf should always remain in
position, to ensure correct air circulation.

¥ To permit storage of food packages of various

sizes, the central door shelf can be adjusted in
height.

D338

CP1OEM

Hints

Saving Energy

¥ Pay careful attention to where the cabinet is

placed. See the section ÒInstallationÓ. When
installed correctly the cabinet will consume less
energy.

¥ Try to avoid keeping the doors open for long

periods or opening the doors too frequently as
warm air will enter the cabinet and cause the
compressor to switch on unnecessarily often.

¥ If the ambient temperature is high, the thermostat

knob is on the coldest setting (higher numbers) and
the appliance is fully loaded, the compressor may
run continuously, causing frost or ice to form on the
evaporator. If this happens, turn the knob to a
warmer setting (lower numbers) to allow automatic
defrosting and so a saving in electricity
consumption.

¥ Do not place warm foods inside the appliance.

Allow warm foods to cool first.

Hints for refrigeration

¥

Do not store warm food or evaporating liquids in
the refrigerator and do cover or wrap up the food,
particularly if it has a strong smell.

To help you use your refrigerator correctly, here are
some useful hints:
¥

Raw meat 

(beef, pork, lamb & poultry): wrap in

polythene bags and place on top of the salad
compartment, this being the coldest spot in the

Содержание IKE 167-6












Отзывы: