Kuppersbusch GKS3820.0ED-HK, Инструкция по использованию и установке

Страница: 8 / 20

7
Gas hob instructions for use
Installation and Operation
3.2 Gas hob installation
IMPORTANT! Check the delivery note to ensure that the consignment is complete and intact. Do not
install a damaged hob; notify the dealer so that your complaint can be processed without any delay.
3.2.1 Making a hole in the worktop
Take account of the space required for the gas connection in the centre underneath the gas hobs.
Align the worktop with a spirit level.
Saw out the hole for the gas hobs.
Seal the cut-out edges with water-resistant varnish.
Use a heat-resistant, permanently elastic sealant to even out edges and uneven surfaces.
3.2.2 Important installation specifications
The installer should note that the appliance that side walls should be no higher than the hot plate
itself. Furthmore, the rear wall, the surfaces surrounding and adjacent to the appliance must be able
to withstanding an temperature of 90ºC.
The adhesive used to stick the plastic laminate to the cabinet must be able to withstand a
temperature of not less than 150ºC otherwise the laminate could come unstuck.
Serious burns caused by fat explosions
● Never extinguish burning fat with water; use an extinguisher blanket or foam extinguisher.
Overheated fats and oils may spontaneously ignite. Appliances must never be left
unattended when in operation.
Serious crushing and knocks
● Danger of slipping: Remove fat which has splashed onto the floor immediately.