background image

H2-50-02

9

For internal use only

4.

Operation

4.1

Operating the cooking zone burners

On the top of the hob a sign can be seen above every key, showing the burner to which the key relates.

The cooking zone burners are ignited as follows once the gas tap or the gas bottle have been opened:

4.1.1

Switching the hob on

Press the on/off key for at least 2 seconds to switch the hob on. The hob will switch on and the power
setting displays will show setting zero in line with the burners, which are switched off.

4.1.2

Igniting the cooking zone burners

Press the plus key for the burner that is to be ignited and then release it in order to ignite a cooking zone
burner.

Press the plus key again within 3 seconds in order to ignite the burner at setting 9. The burner will ignite
at setting 5 when you press the minus key.

Now the control will attempt to ignite the burners 3 times at the most. Between each attempt there will
be a waiting period of 10 seconds. If ignition is not successful, the burner will block after the third attempt
and the respective LED will show the letter “b”. To unlock the cooking zone burner see “Release of a
cooking zone burner” on page 13
.

Each cooking zone burner for which no timer has been programmed will switch off automatically after
4 hours of continuous operation.

As long as a burner is switched on, this will also be shown in the corresponding cooking zone display.

4.1.3

Adjusting a power setting

In order to increase the volume of gas, press the plus key with the cooking zone burner ignited. The
minus key must be pressed to reduce the volume of gas. In order to adjust the volume of gas
progressively, keep the plus or minus key pressed and let it go again at the required setting. The volume
of gas can be set from 1 to 9.

4.1.4

Switching off the cooking zone burners

In order to switch off a cooking zone burner, press the plus and minus keys of the cooking zone briefly
at the same time. The corresponding LED will show the letter “H” (hot) for a few minutes to indicate that
the cooking zone burner is hot.

4.1.5

Switching off all the cooking zone burners

Press the on/off key briefly to switch all the cooking zone burners off at the same time. This switches off
the entire hob.

Содержание GKE 6840.0M


























Отзывы: