H4-72-02-03
4
For internal use only
1.
Safety
The purpose of this service manual is to provide the customer service technicians who already have the
technical knowledge necessary to repair microwave ovens with specific information on the mode of
operation of the EMWK 9600/9800.0.
Danger
!
Repairs may only be carried out by a qualified electrician!
Incorrect repairs can be extremely dangerous for the user!
To prevent electric shocks, please observe the following tips:
• In the event of faults, housing and frame may be live!
• Touching live components inside the appliance may cause dangerous currents to flow through your
body!
• Unplug the appliance before repair!
• When inspecting live parts, a residual current operated device must be used at all times!
• The ground wire resistance must not exceed that specified in the standard! It is of vital importance for
ensuring the safety of people and the functioning of the appliance.
• On completion of repairs, an inspection must be carried out in accordance with VDE 0701 [Associa-
tion of German Electrical Engineers] or the corresponding regulations for your country!
• On completion of repairs, a function and impermeability inspection must be carried out.
• On completion of the repair work a leak rate measurement must be made!
Note!
It is essential to observe the following notes in order to prevent damage to the appliance or the
components:
• The appliances must be disconnected from the mains prior to all repairs. If inspections must be car-
ried out on live appliances, make sure you use a residual current operated device.
• Do not take any measurements in the high-voltage circuit during operation. Risk to life and
limb!
• The mains plug of the microwave oven must always be accessible!
• Do not replace any components as long as the appliance is functioning.
• When looking for faults proceed systematically as outlined in the fault-finding steps.
• Observe EGB instructions.
• Never attempt repairs through the
indiscriminate
exchange of components!
• Always proceed systematically and observe the notes on troubleshooting!
• Do not take any measurements in the high-voltage circuit during operation.
Risk to life and limb!
