background image

WHAT TO DO IN CASE O

The hob or th

e cooking zone doesn’t start

  The hob is badly connected on the electrical network.

  The protection fuse cut-off.

  The looking function is activated.

  The sensitive keys are covered of grease or

  An object is put on a key. 

The control panel displays [ U 

  There is no pan on the cooking zone.

  The pan is not compatible with induction.

  The bottom diameter of the pan is too small.

The control panel displays [ E 

  Disconnect and replug the hob

  Call the After-sales Service.

One or all cooking zone cut-off:

  The safety system functioned.

  You forgot to cut-off the cooking zone for a long time.

  One or more sensitive keys are covered.

  The pan is empty and its bottom overheated.

  The hob also has an automatic reduction of power level and breaking Automatic overheating

Continuous ventilation after cutting off the hob

  This is not a failure, the fan continuous to protect the electronic device.

  The fan cooling stops automatically.

The automatic cooking sy

stem doesn’t start

  The cooking zone is still hot [ H ].

  The highest power level is set [ 9 ].

The control panel displays [ II ]:

 

Refer to the chapter “Pause“.

 
 

ENVIRONMENT PRESERVA

  The materials of packing are ecological and 

  The electronic appliances are composed of 

for the environment, but necessary to t
 

 
 
 
 

 
 
 

  Don't throw your app

  Get in touch with the waste collection centre of your 

commune that is adapted to the recycling of the 
household appliances.

33 

WHAT TO DO IN CASE OF A PROBLEM 

e cooking zone doesn’t start-up: 

The hob is badly connected on the electrical network. 

off. 

The looking function is activated. 
The sensitive keys are covered of grease or water. 

 

 ]: 

There is no pan on the cooking zone. 
The pan is not compatible with induction. 
The bottom diameter of the pan is too small. 

 ]: 

Disconnect and replug the hob. 

sales Service. 

off: 

The safety system functioned. 

off the cooking zone for a long time. 

One or more sensitive keys are covered. 
The pan is empty and its bottom overheated. 

utomatic reduction of power level and breaking Automatic overheating

ation after cutting off the hob: 

This is not a failure, the fan continuous to protect the electronic device.
The fan cooling stops automatically. 

stem doesn’t start-up: 

The cooking zone is still hot [ H ]. 

The highest power level is set [ 9 ]. 

displays [ II ]: 

Refer to the chapter “Pause“. 

ENVIRONMENT PRESERVATION 

s of packing are ecological and recyclable. 

ronic appliances are composed of recyclable, and sometimes harmful

for the environment, but necessary to the good running and the safety of the appliance

Don't throw your appliance with the household refuses 

ith the waste collection centre of your 

commune that is adapted to the recycling of the 
household appliances. 

utomatic reduction of power level and breaking Automatic overheating 

This is not a failure, the fan continuous to protect the electronic device. 

sometimes harmful materials 

and the safety of the appliance. 

Содержание EKI8940.1BCF




















Отзывы: