Operation
GB
25
Automatic boost function
Parboiling takes place at power level 9 with the automatic boost function.
After a certain time the power level will switch down automatically to a lower
simmering setting (1 to 8).
When using the automatic boost function only the simmering setting with
which the food is to be cooked through needs to be selected since the elec-
tronic unit switches down automatically.
The automatic boost function is suitable for dishes which are cold initially and
are then heated up at high power. These dishes do not need to be constantly
monitored when simmering (e.g. boiling meat for soups).
1. Switch a cooking zone on.
2. Select power setting 9. Pressing the
Plus key
again will activate the
automatic boost function. The power level setting will indicate alternately
A and 9 or A and if no pot has been put on the hob.
3. Then immediately use the
Minus key
to select a lower simmering
setting from 1 to 8. A and the selected simmering setting will blink
alternately.
4. The automatic boost function will operate as programmed. After a certain
time (see chart) the cooking process will be continued with the simmering
setting.
Instructions
• While the automatic boost function is in operation, the Plus key can be
used to raise the simmering power setting. Pressing the Minus key will
switch the automatic boost function off.
• If, after activating the automatic boost function, the power level is left at
level 9 and no lower simmering setting is selected, the automatic boost
function will be switched off automatically after 10 seconds and the cooking
level will remain at 9.
Warming zone
(EKE 805 only)
The warming zone is suitable for keeping dishes warm and for ready-cooked
food that needs to be covered to keep it warm.
The warming zone is switched on and off with the corresponding
Plus
or
Minus key
.
Adding a circuit
Additional heating circuits are automatically activated by the pan recognition
function for cooking zones with several circuits.
When the pan recognition device has been switched off (see the section on
“pan recognition”), an extra heating circuit can be activated manually with the
Circuit activation key
. The cooking zone must have been activated.
Power setting
Automatic boost function
Time (min:sec)
1
2
3
4
5
6
7
8
9
0:50
1:30
2:30
3:40
5:20
9:00
2:30
4:00
-
