EKE 805.3/606.3
17
The automatic boost function
All cooking zones are equipped with an automatic boost function. Maximum
power is used for the boost. The time period of the boost depends on the
selected cooking setting. After the elapsed time the cooking zone automatically
switches back to the selected cooking setting.
When selecting the respective cook-
ing setting by pressing the minus-
sensor, the boost function switches
on automatically.
During automatic operation a "A"
lights up in the display alternately
with the selected cooking setting.
When selecting the required cook-
ing setting by pressing the plus-
sensor, it is necessary to press the
plus-sensor again after reaching
cooking setting 9 if the automatic
boost function is to be activated.
Select the required cooking setting.
"A" lights up in the display alter-
nately with the selected cooking
setting.
Cooking zone heating indicator (1)
(Example)
Lights up, as long as the cooking zones are still hot – even after switching off.
Be careful!
The indicator can fail (defective lamp). In this case there is no
warning of hot temperature. Change lamp immediately.
Some instructions on cookware
Only use pans with even and flat bottoms.
Uneven pan bottoms prolong the boost times and increase the power require-
ment. Rough pan bottoms scratch the glass-ceramic area when shifted about.
When using fireproof glass or porcelain cookware, please follow the manufac-
turers instructions.
Choose a pan with a diameter at least as large as the cooking zone.
You will thereby save energy and cooking time. You will also avoid overheating
of the cooking area.
Wherever possible, place a lid on the pan.
You will save a lot of energy by cooking in a closed pan. Liquids and foods
will only boil over if the temperature is too high. For the cooking zones, you
can precisely set the temperature required. With a little practice, you will read-
ily make the correct choice of cooking settings so that nothing boils over even
when a lid is in place.
Dual-circuit cooking zones and frying zones
Usually the cooking zone with the smaller diameter is being heated.
Switch on the outer cooking zone circuit for bigger sauce pans or frying pans.
Press the cooking zone symbol next
to the plus/minus sensor. A control
indicator above the cooking zone
symbol indicates operation of the
dual-circuit cooking zone.
Pressing the cooking zone symbol
once again deactivates the dual cir-
cuit cooking zone or frying zone.
press again
Downloaded from
www.Manualslib.com
manuals search engine
