Kuppersbusch EKE 604.2, Руководство пользователя

Страница: 7 / 12

KC 906.2 and EKE Users Guide USA
7
Frying or dual-circuit cooking zone
As a rule, only the smaller cooking zone diameter is heated. However, when
using frying pans and large saucepans, you may decide to switch on the outer
cooking zone circuit.
Switching the frying or dual-circuit zone on:
– Press the cooking zone symbol
next to the plus/minus-sensor.
A dot at the bottom right of the
display for the cooking level in-
dicates that the function has
been switched on.
– Pressing the cooking zone sym-
bol once again deactivates the
dual circuit cooking zone or fry-
ing zone.
Model EKE 854.2 and KC 906.2 only:
To heat a frying pan you can use the two small,
closely adjacent cooking zones. The temperature
must be controlled via the setting controls for both
cooking zones. We recommend to set both cooking
zones at the same cooking level.
Cooking zone heating indicator
As long as the cooking zone is still hot, an “H” will
appear in the display when the cooking zone has
been switched off.
Child proof lock (sensor-lock)
Operating the sensor lock detains unauthorised persons from using the appli-
ance. In order to activate this lock the cooking area has to be in operation.
Activating child proof lock:
Press the sensor lock (2 seconds).
The child proof lock can be activat-
ed if the cooking area is in opera-
tion. In this case you can only
choose a lower cooking setting or
switch off.
The lock is indicated by 3 flashing control indicators. .
Be careful: Switching off the cooking area does not deactivate the lock!
Deactivating the child proof lock:
Press the sensors under the two left flasing control indicators at once.
After not more than 3 seconds press the sensor under the flashing control
indicator on the right.
Note: When the power supply has been interrupted the child proof lock is no
longer active.
at once, after max. 3 Sek.