Kuppersbusch EEBD 6600.1, Инструкция по использованию и монтажу

Страница: 74 / 96

… Care and maintenance
74
A
Press the adjusting knob to confirm.
– flashes in the digital display.
– The descaling phase, which takes around 30 minutes, starts.
– Finally,
flashes in the digital display.
A Remove the water tank, pour away the descaler and fill the tank with 1.2 l
cold water.
A Put the water tank back.
–
appears in the digital display.
– The rinsing phase starts.
– Finally,
flashes in the digital display.
A
Remove the water tank, pour away the water and refill the tank with 1.2 l
cold water.
A
Put the water tank back again.
–
remains or appears in the digital display.
A When appears in the digital display, remove, empty and dry the water
tank.
– The
message goes out and the time is visible again.
A Wipe up any water in the bottom of the cooking space with a soft cloth.
Replacing a defective light bulb
For safety reasons, in case of a defective light bulb please contact our
Customer Services.
Whether further rinsing cycles are required depends on the level of
soiling of the liquid being pumped off.
– or is displayed in the digital display.
For the , or + operating modes, after descaling the
water that is pumped back into the water tank may not be clear. This
will not affect the cooking or baking characteristics nor the quality of
the food being cooked or baked.