EEB 6800.0
31
Automatic turn-on and shut-off
If you wish use the oven’s time-delay feature, you may pre-select both cooking
time and finish time. The automatic start time itself cannot be specified, but
this is derived from both settings.
Example:
It is 8.00 and you wish to have your roast ready at 13.00. The roast needs to
be cooked for 90 minutes.
– Change the cooking time
u
from 0.00 to 1.30.
– Then change the finish time
n
from 9.30 to 13.00.
– Confirm with
j
.
The oven turns on at 11.30 and off at 13.00.
Change automatic weight
d
/ weight system
In the roasting programmes and the ”Bread
Z
” baking programme, cooking
time and temperature can be selected dependent on the weight. The text
display requests you to select the weight of the food to be cooked.
In these programmes, input weight immediately after selecting the
programme.
Switching the oven off
– Touch the key
e
.
The oven is switched off.
F
If you have accidentally turned the oven off whilst a programme is
running, you can resume that programme.
Resuming interrupted programmes
Did you accidentally turn the oven off whilst a programme was running?
– Switch the oven on again. The text display will ask you: <progr. interrupted!
Continue? OK>
– Confirm by touching
j
.
Blend in the actual oven temperature
– Touch the key
g
. The current oven temperature is briefly displayed.
Additional functions
Rapid heating
J
Use this function to have the oven heat at higher performance to the
temperature set.
F
The ”Rapid heating”
J
function can be added in many heating
programmes. (See ”Operating guide” on page 30.)
– Choose a heating programme and then touch ”Rapid heating”
J
. Both sen-
sor keys light up red.
– Select all the values as usual and confirm your input with
j
.
F
When heating has completed, the illuminated ”Rapid heating” symbol
J
no longer shows red.
Memory function
M
/
N
The oven has a memory function you can use to store
two programmes you
have composed yourself as additional programmes
.
Saving an additional programme:
– Select a baking, roasting or heating programme.
– Set the desired temperature and time.
– Then select ”Rapid heating”
J
if applicable.
–
Hold the
memory sensor
M
or
N
depressed
, until the text diplays
<programme saved>.
The programme set can now be saved with
M
or
N
and can be used like
every other baking, roasting or heating programme.
Choosing an additional programme:
– Press the
M
or
N
sensor and confirm by touching
j
.
The programme starts.
The values set can be changed without such changes being saved.