Kuppersbusch EDIP6400.2, Инструкция по использованию и установке

Страница: 3 / 11

14
EN

Before using the extractor for the first time, you must observe
the installation and connection instructions.

Never pull the cable to unplug the extractor.

Do not switch on the extractor if the electricity cable is worn
or has cuts or if there are signs of deterioration around the
control panel.

If the extractor stops working or functions abnormally, unplug
it from the mains and advise the technical service.

Do not leave gas burning without a pan above it under the
hood.

Do not allow grease to accumulate in any part of the
extractor, especially in the filter as this COULD PRODUCE A
FIRE RISK!

Before installing the extractor consult local rules and
regulations in force with respect to current standards on air
and fumes.

Before connecting the extractor to the mains, check that both
the voltage and the frequency conform to that shown on the
characteristics label of the extractor located inside it.

We recommend the use of gloves and caution when cleaning
the inside of the extractor.

Your extractor is designed for domestic use and only for
expelling and purifying gases arising from food preparation.
Its use for any other purpose must be at your own
responsibility and may be dangerous.

This device includes a security component that cuts it off the
power when you remove the main filter.

You should contact the nearest Qualified Technical
Assistance Service for any repairs always using original
spare parts. Repairs and modifications carried out by others
could damage the apparatus or cause it to malfunction, and
risking your safety. The manufacturer cannot be held liable
for inappropriate use of the apparatus.