
4. Press
to confirm.
To turn off the function, press . The
display shows a message. Press again
and then
to confirm.
When you turn off the oven, the
function also turns off.
Set + Go
The function lets you set a heating
function (or a programme) and use it later
with one press of any symbol.
1. Turn on the oven.
2. Set a heating function.
3. Press again and again until the
display shows: Duration.
4. Set the time.
5. Press again and again until the
display shows: Set + Go.
6. Press
to confirm.
Press any symbol (except for ) to start
the function: Set + Go. The set heating
function starts.
When the heating function ends, a signal
sounds.
• Function Lock is on when
the heating function works.
• The menu: Basic Settings
lets you turn the function:
Set + Go on and off.
Automatic switch-off
For safety reasons the oven turns off after
some time, if a heating function works and
you do not change any settings.
(°C)
(h)
30 - 115
12.5
120 - 195
8.5
200 - 230
5.5
The Automatic switch-off does not work
with the functions: Light, Food Sensor,
Duration, End Time.
Brightness of the display
There are two modes of display
brightness:
• Night brightness - when the oven is
turned off, the brightness of the display
is lower between 10 PM and 6 AM.
• Day brightness:
– when the oven is turned on.
– if you touch a symbol during the
night brightness (apart from ON /
OFF), the display goes back to the
day brightness mode for the next
10 seconds.
– if the oven is turned off and you set
the function: Minute Minder. When
the function ends, the display goes
back to the night brightness.
Cooling fan
When the oven operates, the cooling fan
turns on automatically to keep the
surfaces of the oven cool. If you turn off
the oven, the cooling fan can continue to
operate until the oven cools down.
HINTS AND TIPS
WARNING! Refer to Safety
chapters.
26