
Step 1
Step 2
Step 3
Step 4
Put the test paper
into water for about
1 sec. Do not put
the test paper un‐
der running water.
Shake the test pa‐
per to remove the
excess of water.
After 1 min, check
water hardness
with the table be‐
low.
Set the water hard‐
ness level in the
menu: Basic settings.
The colours of the test paper continue to change. Do not check water hardness later than 1
min after test.
You can change the water hardness level in the menu: Basic settings / Water hardness.
The table below shows water hardness range (dH) with the corresponding level of
Calcium deposit and the quality of water. When the water hardness level is 4, fill the
water drawer with bottled water.
Water hardness
Test paper
Calcium de‐
posit
(mmol/l)
Calcium de‐
posit (mg/l)
Water clas‐
sification
Level
dH
1
0 - 7
0 - 1.3
0 - 50
soft
2
8 - 14
1.4 - 2.5
51 - 100
moderately
hard
3
15 - 21
2.6 - 3.8
101 - 150
hard
4
22 - 28
3.9 - 5
151 - 200
very hard
DAILY USE
WARNING! Refer to Safety
chapters.
Navigating the menus
1. Turn on the oven.
2. Press
or
to select the menu
option.
3. Press
to move to the submenu or
accept the setting.
At each point you can go back
to the main menu with .
The menus in overview
Main menu
Symbol / Menu
item
Application
Heating Func‐
tions
Contains a list of heat‐
ing functions.
Recipes
Contains a list of auto‐
matic programmes.
11