Kuppersberg SLIMLUX S, Технический паспорт

Страница: 7 / 24

7
ENGLISH
Cooker hood
TECHNICAL PASSPORT
a carbon smoke filter (is purchased
separately).
6.9
Check the reliability of the cooker
hood mounting, feed and connect the
cord to the mains through socket.
In order to provide additional
protection against voltage fluctuations
in the network, it is recommended
to connect the extractor hood via an
additional automatic circuit breaker 6A.
7. INSTRUCTIONS FOR USE OF THE
COOKER HOOD
7.1
The cooker hood with a touch
switch has 3 speeds of ventilation.
Depending on the amount of
evaporation during cooking, you can
choose a low, medium or high of
ventilation level.
7.2
Before cooking, turn on the
hood in the required operating mode.
It is recommended to continue work of
the cooker hood for 3-5 minutes after
cooking, thus the air in the kitchen
will be cleared from the residue of the
vapours.
7.3
On the decorative glass of your
cooker hood there is a touch switch
for operating modes of the engine and
lighting lamps (Fig. 5):
– on/off lighting
1 speed (low speed) – press the
switch to position “1”
2 speed (average speed) – press the
switch to position “2”
3 speeds (high speed) – press the
switch to position “3”
The touch switch with the symbol of
the light bulb, intended to turn on the
lamp at insufficient illumination of the
working area of the cooker, is located
on the left side of body of the cooker
hood.
Fig. 4
Fig. 5
Fig. 4.1