Kuppersberg NOFF 18769, Технический паспорт

Страница: 16 / 48

16
Technical passporT english
refrigerator noFF 18769
17. Do not food which goes bad easily at
low temperatures(especially chiller
compartment), such as bananasm
and melons.
18. Place the ice try at the freezer in
order to achieve optimal ice-freezing
19. If you want to prevent an undue rise
in the temperature of the frozen
food while defrosting the appliance,
please wrap the frozen food in
several layers of paper such as
newspaper.
CLEANING
1. Always disconnect the appliance
from the mains supply.
2. Do not use abrasives. Periodically
clean with a sponge dampened
in lukewarm water. A neutral pH
detergent may be used. Rinse and
dry with a soft cloth.
3. Wipe the outside with a soft cloth
dampened in water.
4. Periodically clean the front grille
and the radiator at the back with a
vacuum cleaner or a brush
5. Any increase in temperature of
frozen food as a result of either the
cleaning a refrigerator(freezer) or
the frequency of opening the door
can make the storage life of the food
to be shortened.
PROLONGED DISUSE
1. Empty the refrigerator and freezer
compartments.
2. Unplug the appliance from the
mains.
3. Clean and dry both compartments.
4. Leave the doors open to prevent the
formation of unpleasant odors.
5. Contact our Customer Service when
reinstalling the refrigerator.
AFTER SALES SERVICE
Before contacting our After Sales
Service Department:
1. Try to remedy the problem (please
read section “trouble shooting
guide”).
2. Restart the appliance to check
whether the fault repeats. If the
malfunction persists, switch off the
appliance and try again after an hour.
3. If the malfunction still persists,
then contact our Customer Service,
specifying:
Â
the nature of the problem,
Â
the appliance model number,
Â
your full address, telephone
number and area code.
NOTE : Door opening direction changes
carried out by our Customer Service are
not covered by the terms of guarantee.
TROUBLESHOOTING GUIDE
1. The appliance does not work. Check:
Â
power failure,
Â
properly inserted plug,
Â
(if applicable) connection of the
two-pole circuit breaker,
Â
damage to the mains lead,
Â
correct setting of the temperature
controls.
2. The temperature inside the
compartments is not low enough,
Check for:
Â
closure of the doors,
Â
installation near a heat source,