Kuppersberg INNOVA60, Технический паспорт, Страница: 24 / 51

24
TECHNICAL PASSPORT ENGLISH
Extractor hood
1 – housing
2 – spigot adapter (Ø150 to Ø120)
3 – Mains cable with earth connection
4 – Hood operation switch (sensor)
5 – decorative panel (outer glass)
6 – decorative panel (inner glass)
7 – lighting (LED strip)
5.4 The Kitchen hood consists of the
following components (fig.3 / fig.3.1).
Fig .3
Fig.3.1
6. HOOD INSTALLATION
INSTRUCTIONS
6.1 Select the operating mode and
location for installing the hood.
6.2 Take the hood out of its packing
box.
6.3 Connect the cooker hood to the
mains and check all its functions.
As a reminder, the height of the hood
must be at least 650 mm above electric
hobs and at least 750 mm above gas
hobs (fig. 1).
6.4 Taking into account the height of
the hood and the condition for the hood
to fit to the bottom shelf of the hinged
furniture cabinet, mark and cut a rectan-
gular hole according to the dimensions
of AhB (Fig. 4) of the built-in part of the
hood using the previously made paper
template.
Fig. 4